Interbike 2014: New Mountain and Road hubs from Onyx Racing Products

Onyx Racing Products from Minnesota is introducing mountain and road hubs  to the market that have been in testing for the last three years. They look to be low friction, noiseless, and built tough with roller bearings.  Designed and made in USA with ceramic bearings from Japan.  These will be a great product to check out!

Also so check out my video of Jim from Onyx presenting their hubs at:  https://www.facebook.com/dirtmerchantbikes?hc_location=timeline

 

image.jpg
image.jpg
image.jpg
image.jpg
image.jpg

Interbike2014: Juliana Furtado herself

My wife and I rode with Juliana Furtado, Jacquie Phelan and Keith Bontrager on a small (30'people) charity ride up the Nisene Marks fire road around Thanksgiving 2000.  All three of them were so nice and a great example of the types of folks that you meet on a mountain bike.  Keith chatted with up all the way up.  I said hello to Juliana today and she remembered meeting up and the date of the ride probably better than I did.

image.jpg

Tips on Shimano Disc Brake Bleeding from the Shimano Tech Pro in charge of Brakes

[From the Shimano Tech Seminar on bleeding brakes]

Syringe Bleed - 

Attach bleed syringe to the bleed valve on the disc brake calipers.

Attach the bleed funnel to the bleed port on the brake lever.

Pull brake lever & open and close bleed valve - shoots air in the valve into the bleed syringe.  

Push in about of a 1/3 of a syringe of brake fluid at a time.  Cycle the brake lever slowly to get bubbles out.  Cycling the brake lever too fast tends to break up air bubbles into many smaller bubbles which are more difficult to get out.

Don't try to back pressure air out of the brake valve by pulling air out with the bleed syringe.  This may actually introduce air into the system.

Don't overfill the system:  

  • Caliper piston seals are permanently flexed and can let dirt in more easily, fluid will come out of the weeping port at the lever.
  • Orient bleed valve at the top to facilitate getting air out.  Move caliper and brake levers around while cycling brake lever to help get air out.

Interbike 2014: G-Form Pads test

I had the G-Form pads on for 2 hours in the 90 degree heat.  They remained comfortable and the G-Form guys assure me that these pads are as protective as much thicker, traditional knee and elbow pads.  I'll look for more content on the G-Form pads tomorrow at the Interbike Expo.  Apparently, their VP of Innovation has been know to wear G-Form elbow pads while whacking himself in the elbow with a hammer.  I'll have video if I see that. 

Being designed and made in USA is an additional bonus!

image.jpg

Interbike 2014: Transition Patrol bike test (155mm rear travel)

This was my last bike test of the day and it was a good one.  Transition has changed from a single pivot design with a seatstay pivot to a Horst Link design now that the Horst Link patent has expired.

Climbing - 3 stars

The Patrol is a solid climbing bike, if not necessarily the best climber around.  It's good enough that I wouldn't have any complaints about its climbing if this were my personal bike.

Descending - 5 stars

Transition bikes have a great handling balance and the Patrol is no exception.  The Patrol has an eager, get up and go personality.  Yet this does not compromise descending stability.  It was really a fun feeling bike.

Cornering - 5 stars

The Patrol felt eager but stable in corners.  I cannot overemphasize how fun this bike felt.

Summary:  The Patrol was my second favorite bike of the day, lagging the Devinci Troy only in climbing ability.  Fun feeling bikes are always nice to ride and the Patrol has fun in spades.

Rating Guide

5 stars - Absolutely outstanding

4 stars

3 stars - Solid performance, meets expectations

2 stars

1 star - Misses expectations by a wide margin

image.jpg
Transition uses a Horst Link rear suspension design for the Patrol.

Transition uses a Horst Link rear suspension design for the Patrol.

image.jpg

Interbike 2014: Pivot Mach 6 Bike Review (155mm rear travel)

I am really conflicted about Pivot bikes.  Having owned a Titus Switchblade, I really want to like any bike that Chris Cocalis creates with Pivot.  That said, I have never fully felt comfortable on a Pivot bike and the Mach 6 is no exception.

Climbing - 3 stars

With a focus on descending and heavier weight than many of the other bikes tested today, the Mach 6 was a solid climber, but by no means the best.  The Mach 6's additional weight no doubt affects it climbing performance.

Descending - 5 stars

At least the Mach 6 is consistent in its performance.  Descending feel was super solid and predictable, yet still fun.

Cornering - 4 stars

The Mach 6 is steady and predictable in cornering, if lacking a bit in liveliness.

Summary:  The Mach 6 is a great descending bike at the expense of some climbing ability. It's baby brother, the Mach 5.7, is a super climber, but doesn't feel completely settled going downhill.  Combining the best of these two bikes in one bike would make a killer bike, but other bikes that I rode today (namely the Devinci Troy and the Transition Patrol) actually get close to this ideal.

Rating Guide

5 stars - Absolutely outstanding

4 stars

3 stars - Solid performance, meets expectations

2 stars

1 star - Misses expectations by a wide margin

image.jpg
Dw-link suspension has an initial rearward travel to reduce suspension squatting.

Dw-link suspension has an initial rearward travel to reduce suspension squatting.

image.jpg

Interbike 2014: Orbea Rallon Bike Review (160mm rear travel)

In many ways, this is a different bike than the other bikes I've tested today.  The Rallon is clearly oriented toward downhills and it shows

Climbing - 2 stars

Even at 5 pounds heavier than many of the other bikes I rode today, the Rallon was not a bad climber.  The Rallon was a better climber than the Stumperjumper Evo 27.5 which I had maligned in an earlier review.

Descending - 5+ stars

I give the Rallon 5+ stars because it really is in a totally different league for descending than the other bikes I tested.  When the trail turns downhill, the Ralllon comes alive and feels super confident in a way that none of the other bikes I rode today could match.

Cornering - 4 stars

Cornering on the Rallon could not be described as nimble, but it was super solid in feel.

Summary:  The Rallon is a great bike for those willing to compromise climbing performance for a rock-solid descending feel.

Rating Guide

5 stars - Absolutely outstanding

4 stars

3 stars - Solid performance, meets expectations

2 stars

1 star - Misses expectations by a wide margin

image.jpg
image.jpg
image.jpg

Interbike 2014: Devinci Troy Carbon Bike Review (140mm rear travel)

Wow, I love this bike.  It climbs well and feels both nimble and stable at the same time going downhill.  It rides like a BMX bike with 140mm of travel.  The Troy uses a Dave Weagle designed Split Pivot rear suspension design to minimize suspension feedback affecting pedaling and braking.

Climbing - 5 stars

The Troy feels super responsive to power input when climbing. (The alloy edition did feel less snappy perhaps due to a higher bike weight)

Descending - 5 stars

The Troy was able to feel both responsive and planted when descending.  The feeling of the Troy was really confidence-building while remaining fun to ride.

Cornering - 5 stars

The Troy had a lively, responsive feel that was super fun to ride in corners.

Summary:  Being lively and predictable is not mutually exclusive.

 

Rating Guide

5 stars - Absolutely outstanding

4 stars

3 stars - Solid performance, meets expectations

2 stars

1 star - Misses expectations by a wide margin

image.jpg
image.jpg
image.jpg